Shop
Showing 161–200 of 996 results
-
Chargers, Drum, Golden Eagle
Increased Magazine -Drum- 2000bb for M4/M16 electric Golden Eagle series (NERO)
Chargers, Drum, Golden EagleIncreased Magazine -Drum- 2000bb for M4/M16 electric Golden Eagle series (NERO)
An electric charger made of polymer, capable of holding up to 2000 BB, It is intended for use with M4 replicas / M16.
The magazine is equipped with an electric mechanism for BB rotation controlled by a switch located on the rear wall of the magazine. BBs are inserted from above, as in the case of normal Hi-Cap magazines. Powered by 4 AAA batteries (not included in the set).
SKU: JGG-05-028236 -
Chargers, Electric rifle magazines, Magazines for single-stack electric rifles, PTS Syndacate
EPM PTS® single-stack magazine for Shock and Recoil -SRE- 120bb (NERO)
Chargers, Electric rifle magazines, Magazines for single-stack electric rifles, PTS SyndacateEPM PTS® single-stack magazine for Shock and Recoil -SRE- 120bb (NERO)
charger – 150bb – monofilament – M4 – polymer – pts – epm – shock & recoil – Marui – sre – sopmode – airsoft – airsoft – airsoftgun –
software Italy – tactical – military – softairitaly – army – pewpew – guns – softairteam
SKU: PTS-SRE120BK -
Chargers, Electric rifle magazines, Magazines for single-stack electric rifles, Tokyo Marui
Caricatore monofilare Next-Gen AK47 90bb Magazine Tokyo Marui (NERO)
Chargers, Electric rifle magazines, Magazines for single-stack electric rifles, Tokyo MaruiCaricatore monofilare Next-Gen AK47 90bb Magazine Tokyo Marui (NERO)
Single-stack magazine.
Capacity 90bb.
Material METAL.
Per serie AK47 EBB TYPE 3 NEXT GEN.
Perfect BB feeding with provision for blocking at the end of shots.SKU: TMA237075 -
Cocking levers, PTS Syndacate, GBBR spare parts
Charging Handle Raptor-LT FDE GBB MWS Tokyo Marui PTS Syndicate (NERA)
Cocking levers, PTS Syndacate, GBBR spare partsCharging Handle Raptor-LT FDE GBB MWS Tokyo Marui PTS Syndicate (NERA)
Ambidextrous Radian Raptor-LT™ Charging Handle from PTS Syndicate. Inspired by a charging handle designed by Radian Weapons. Machined from 6000 series aluminum with a black anodized finish.
This charging handle is designed for Tokyo Marui M4 MWS GBBR airsoft replicas.
SKU: RD010490307 -
Cocking levers, PTS Syndacate, GBBR spare parts
Charging Handle Raptor-LT FDE GBB MWS Tokyo Marui PTS Syndicate (SO-NERA)
Cocking levers, PTS Syndacate, GBBR spare partsCharging Handle Raptor-LT FDE GBB MWS Tokyo Marui PTS Syndicate (SO-NERA)
Ambidextrous Radian Raptor-LT™ FDE Charging Handle from PTS Syndicate. Inspired by a charging handle designed by Radian Weapons. Machined from 6000 series aluminum with a black anodized/FDE finish.
This charging handle is designed for Tokyo Marui M4 MWS GBBR airsoft replicas.
SKU: RD010490313 -
Cylinders, Internal and external parts of rifles, Internal parts of rifles, T238
Cilindro PTFE Coating for AEG Type: 100% T238
Cylinders, Internal and external parts of rifles, Internal parts of rifles, T238Cilindro PTFE Coating for AEG Type: 100% T238
7075-T6 Aerospace Aluminum – 30% lighter than standard alloys | Tensile Strength 560MPa
Dual Enhancement Technology | Hard Anodized Exterior (HV≥800) | Mirror-polished Bore
PTFE Coating Benefits | Ultra-low friction (μ=0.04) | >95% Coating Retention after 100K cycles)
Thermal Management – 43×0.2mm deep trapezoidal grooves – Optimized heat dissipation performance
Positioning Grooves – Compatible with the gearbox, with a positioning structure
Blow-back Channel – Design for the gearbox with blow-back function
SKU: T238-7TCC-100 -
Cylinders, Internal and external parts of rifles, Internal parts of rifles, T238
Cilindro PTFE Coating for AEG Type: 50% T238
Cylinders, Internal and external parts of rifles, Internal parts of rifles, T238Cilindro PTFE Coating for AEG Type: 50% T238
7075-T6 Aerospace Aluminum – 30% lighter than standard alloys | Tensile Strength 560MPa
Dual Enhancement Technology | Hard Anodized Exterior (HV≥800) | Mirror-polished Bore
PTFE Coating Benefits | Ultra-low friction (μ=0.04) | >95% Coating Retention after 100K cycles)
Thermal Management – 43×0.2mm deep trapezoidal grooves – Optimized heat dissipation performance
Positioning Grooves – Compatible with the gearbox, with a positioning structure
Blow-back Channel – Design for the gearbox with blow-back function
SKU: T238-7TCC-50 -
Cylinders, Internal and external parts of rifles, Internal parts of rifles, T238
Cilindro PTFE Coating for AEG Type: 60% T238
Cylinders, Internal and external parts of rifles, Internal parts of rifles, T238Cilindro PTFE Coating for AEG Type: 60% T238
7075-T6 Aerospace Aluminum – 30% lighter than standard alloys | Tensile Strength 560MPa
Dual Enhancement Technology | Hard Anodized Exterior (HV≥800) | Mirror-polished Bore
PTFE Coating Benefits | Ultra-low friction (μ=0.04) | >95% Coating Retention after 100K cycles)
Thermal Management – 43×0.2mm deep trapezoidal grooves – Optimized heat dissipation performance
Positioning Grooves – Compatible with the gearbox, with a positioning structure
Blow-back Channel – Design for the gearbox with blow-back function
SKU: T238-7TCC-60 -
Cylinders, Internal and external parts of rifles, Internal parts of rifles, T238
Cilindro PTFE Coating for AEG Type: 70% T238
Cylinders, Internal and external parts of rifles, Internal parts of rifles, T238Cilindro PTFE Coating for AEG Type: 70% T238
7075-T6 Aerospace Aluminum – 30% lighter than standard alloys | Tensile Strength 560MPa
Dual Enhancement Technology | Hard Anodized Exterior (HV≥800) | Mirror-polished Bore
PTFE Coating Benefits | Ultra-low friction (μ=0.04) | >95% Coating Retention after 100K cycles)
Thermal Management – 43×0.2mm deep trapezoidal grooves – Optimized heat dissipation performance
Positioning Grooves – Compatible with the gearbox, with a positioning structure
Blow-back Channel – Design for the gearbox with blow-back function
SKU: T238-7TCC-70 -
Cylinders, Internal and external parts of rifles, Internal parts of rifles, T238
Cilindro PTFE Coating for AEG Type: 80% T238
Cylinders, Internal and external parts of rifles, Internal parts of rifles, T238Cilindro PTFE Coating for AEG Type: 80% T238
7075-T6 Aerospace Aluminum – 30% lighter than standard alloys | Tensile Strength 560MPa
Dual Enhancement Technology | Hard Anodized Exterior (HV≥800) | Mirror-polished Bore
PTFE Coating Benefits | Ultra-low friction (μ=0.04) | >95% Coating Retention after 100K cycles)
Thermal Management – 43×0.2mm deep trapezoidal grooves – Optimized heat dissipation performance
Positioning Grooves – Compatible with the gearbox, with a positioning structure
Blow-back Channel – Design for the gearbox with blow-back function
SKU: T238-7TCC-80 -
Tactical clothing, Carrying straps, GFC
Carrying strap 2 GFC Points (MULTICAM BLACK)
A carrying belt a 2 points made of resistant cordura, perfect for any assault replica. A large and soft comfort cushion allows you to comfortably carry replicas of greater weight and size.
Attached to the replica in two points using metal snap hooks. The length of the belt is adjustable on both sides.
SKU: GFT-24-0074451 -
Tactical clothing, Carrying straps, GFC
Carrying strap 2 GFC Points (MULTICAM)
A carrying belt a 2 points made of resistant cordura, perfect for any assault replica. A large and soft comfort cushion allows you to comfortably carry replicas of greater weight and size.
Attached to the replica in two points using metal snap hooks. The length of the belt is adjustable on both sides.
SKU: GFT-24-007449 -
Tactical clothing, Carrying straps, GFC
Carrying strap 2 GFC Points (TAN)
A carrying belt a 2 points made of resistant cordura, perfect for any assault replica. A large and soft comfort cushion allows you to comfortably carry replicas of greater weight and size.
Attached to the replica in two points using metal snap hooks. The length of the belt is adjustable on both sides.
SKU: GFT-24-007450
