CNC Wedge Pins AR15 Retro Arms
6 in stock
11,90€
6 in stock
CNC Wedge Pins AR15, pin for AR15 series / M4 softair, which allows you to tighten the upper to the lower eliminating the play due to inaccuracies or wear between the 2.
set includes 2 complete pins, by combining the various components you can configure them 4 different lengths to best adapt them to your airsoft rifle
the configurations that can be achieved will be respectively: one 33mm and one 38mm axle, or, one 35mm and one 36mm axle
| Weight | 0,025 kg |
|---|
Related products
-
AT COST, External parts of rifles, Internal and external parts of rifles, Slides and slide covers, Vector Optics
Medium 20mm metal support -4 Slot- Vector Optics
AT COST, External parts of rifles, Internal and external parts of rifles, Slides and slide covers, Vector OpticsMedium 20mm metal support -4 Slot- Vector Optics
metal support for weaver sled,useful for lifting red dots/optics from the slides of the replicas, height: 0,83 inches, ideale per magnifier 3x
SKU: VEC-10-030050 -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 90 m/s (FPS-90+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 90 m/s (FPS-90+)
The FPS spring from 90 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-90+
