Precision barrel 6.02mm x 275mm for AEG in Maple Leaf Steel
Mplae leaf internal barrel for AEG electric rifles
Material : steel
Diameter : 6.02 mm
Length : 275 mm
rif: 43236
Out of stock
21,90€
Out of stock
| Weight | 0,10 kg |
|---|
Related products
-
Control units and Mosfets, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS Micro Mosfet (MICRO1)
Control units and Mosfets, FPS, Internal and external parts of rifles, Internal parts of riflesFPS Micro Mosfet (MICRO1)
Very small MOSFETs, conceived specifically for the reduced internal spaces of the replicas from Softair (MICRO1)
Measures in millimeters:
19.8 x 6.6 x 3.9100% MADE IN ITALY
SKU: MICRO1 -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 85 m/s (FPS-85)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 85 m/s (FPS-85)
The FPS spring from 85 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
In the calibration process, the thickness due to the bearings of the spring guide and the piston head was not taken into consideration, therefore, with the same initial conditions, an increase in performance of approximately 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-85 -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 95 m/s (FPS-95)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 95 m/s (FPS-95)
The FPS spring from 95 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-95
