FPS Nozzle rod in loaded technopolymer for Tokyo Marui next gen recoil shock mechanics (ASRE)
Pangipallino auction in Tecnopolimero loaded for Tokyo Marui Next Gen Recoil Shock (ASRE)
100% MARUI COMPATIBLE
100% MADE IN ITALY
Out of stock
8,90€
Out of stock
Pangipallino auction in Tecnopolimero loaded for Tokyo Marui Next Gen Recoil Shock (ASRE).
The innovative design and accurate pre-production tests of this spare part have led us to obtain optimal timing in the opening phases, draft, chambering and ejection of the pellet and the choice and use of the most suitable filled technopolymer.
100% MARUI COMPATIBLE
100% MADE IN ITALY
| Weight | 0,025 kg |
|---|
Related products
-
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 100 m/s (FPS100+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 100 m/s (FPS100+)
The FPS spring from 100 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS100+ -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 95 m/s (FPS-95)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 95 m/s (FPS-95)
The FPS spring from 95 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-95
