FPS Micro Mosfet Active Brake + Airsoft T-Plug (M2AB+)
Small size Mosfet Active Brake, conceived specifically for the reduced internal spaces of the replicas from Softair (M2AB+).
Measures in millimeters:
26.20 x 12 x 3.30
100% MADE IN ITALY
2 in stock
16,50€ 21,90€
2 in stock
Small size Mosfet Active Brake, conceived specifically for the reduced internal spaces of the replicas from Softair.
Preserves the electro/mechanical contacts of the ASG from burns due to sparks caused by closing the electrical contact.
Decreases circuit current dissipation ensuring longer battery life and causing a slight increase in burst.
E’ been subjected to prolonged stress tests with lipo batteries up to 14.8 volts giving excellent results in terms of reliability.
This mosfet also improves the response of the ASG to the trigger.
Our mosfet is supplied packaged in a special anti-static bag and complete with:
– 100 cm of W19C signal cable
– two heat-shrink sheaths 3:1 with external diameter 12 mm and length 35 mm
– AIRSOFT T-PLUG connector to be soldered into the appropriate seat on the board.
100% MADE IN ITALY
| Weight | 0,025 kg |
|---|
Related products
-
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 95 m/s (FPS-95)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 95 m/s (FPS-95)
The FPS spring from 95 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-95 -
AT COST, External parts of rifles, Internal and external parts of rifles, Slides and slide covers, Vector Optics
Medium 20mm metal support -4 Slot- Vector Optics
AT COST, External parts of rifles, Internal and external parts of rifles, Slides and slide covers, Vector OpticsMedium 20mm metal support -4 Slot- Vector Optics
metal support for weaver sled,useful for lifting red dots/optics from the slides of the replicas, height: 0,83 inches, ideale per magnifier 3x
SKU: VEC-10-030050
