Magazine release lever for Specna Arms M4/M16 series (NERA)
For M4/M16 type replicas. It can be applied on both the left and right side of the receiver
Out of stock
4,90€
Out of stock
| Weight | 0,02 kg |
|---|
Related products
-
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 85 m/s (FPS-85)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 85 m/s (FPS-85)
The FPS spring from 85 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
In the calibration process, the thickness due to the bearings of the spring guide and the piston head was not taken into consideration, therefore, with the same initial conditions, an increase in performance of approximately 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-85 -
Rings and Supports, External parts of rifles, Internal and external parts of rifles, Theta Optics
High metal ring 25mm for -Flashlight/Optics- (in pairs) Theta Optics
Rings and Supports, External parts of rifles, Internal and external parts of rifles, Theta OpticsHigh metal ring 25mm for -Flashlight/Optics- (in pairs) Theta Optics
Made entirely of metal. It consists of two rings in diameter 25 mm, which are screwed in with Allen screws. Universal mounting allows for easy attachment to any replica equipped with a standard RIS rail from 22 mm.
The fabric inserts on the inside of the rings protect the optics from scratches. The set includes a dedicated Allen key.
SKU: THO-09-011613
