Molla SP150 Tune up Spring for AEG Guarder
SP150 model.
Hardened steel material.
Anti-yield design.
Very high performance and reliability.
Out of stock
14,70€
Out of stock
| Weight | 0,03 kg |
|---|
Related products
-
Delayer, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS Three-piece set of loaded technopolymer delayers specifically designed for fast bursts (DL04)
Delayer, FPS, Internal and external parts of rifles, Internal parts of riflesFPS Three-piece set of loaded technopolymer delayers specifically designed for fast bursts (DL04)
Delayers in Tecnopolimero loaded expressly designed for fast gusts in collaboration with Nikk Sakk.extreme.aisoftcoman.
100% MARUI COMPATIBLE
100% MADE IN ITALYSKU: DL04 -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 90 m/s (FPS-90+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 90 m/s (FPS-90+)
The FPS spring from 90 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-90+ -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 95 m/s (FPS-95)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 95 m/s (FPS-95)
The FPS spring from 95 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-95
