Slitta M-Lok 5 slot aluminium Metal (NERA)
Standard sled 21mm
5 Slot
Per sistema M-LOK
Mounting screws included
In aluminium
rif: 31350
2 in stock
8,90€
2 in stock
| Weight | 0,07 kg |
|---|
Related products
-
Rings and Supports, External parts of rifles, Internal and external parts of rifles, Theta Optics
High metal ring 25mm for -Flashlight/Optics- (in pairs) Theta Optics
Rings and Supports, External parts of rifles, Internal and external parts of rifles, Theta OpticsHigh metal ring 25mm for -Flashlight/Optics- (in pairs) Theta Optics
Made entirely of metal. It consists of two rings in diameter 25 mm, which are screwed in with Allen screws. Universal mounting allows for easy attachment to any replica equipped with a standard RIS rail from 22 mm.
The fabric inserts on the inside of the rings protect the optics from scratches. The set includes a dedicated Allen key.
SKU: THO-09-011613 -
AT COST, External parts of rifles, Internal and external parts of rifles, Slides and slide covers, Vector Optics
Medium 20mm metal support -4 Slot- Vector Optics
AT COST, External parts of rifles, Internal and external parts of rifles, Slides and slide covers, Vector OpticsMedium 20mm metal support -4 Slot- Vector Optics
metal support for weaver sled,useful for lifting red dots/optics from the slides of the replicas, height: 0,83 inches, ideale per magnifier 3x
SKU: VEC-10-030050 -
Internal and external parts of rifles, Internal parts of rifles, Pistons, SHS
Lightweight ABS piston with 14 SHS metal teeth
Internal and external parts of rifles, Internal parts of rifles, Pistons, SHSLightweight ABS piston with 14 SHS metal teeth
SHS piston made of durable plastic and carbon steel. The cutouts used made it possible to reduce its weight. The piston has 14 steel teeth, which make it perfect for combining with High Torque gears. This piston can easily be used for tuning replicas.
SKU: SHS-08-001521 -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 90 m/s (FPS-90+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 90 m/s (FPS-90+)
The FPS spring from 90 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-90+
