FPS POM nozzle for M4/M16 series with sealing ring (SPM4P)
Technopolymer nozzle for M4/M16 series with sealing ring (SPM4E), obtained from solid and machined in CNC.
Designed to be compatible with most M4/M16 replicas on the market today.
This product ensures excellent holding of the air compression phase, so the shots are more uniform and precise.
100% MADE IN ITALY
4 in stock
8,50€
4 in stock
Technopolymer nozzle for M4/M16 series with sealing ring (SPM4E), obtained from solid and machined in CNC.
Designed to be compatible with most M4/M16 replicas on the market today.
This product ensures excellent holding of the air compression phase, so the shots are more uniform and precise.
The material used has characteristics of high elasticity and smoothness and guarantees top and long-lasting performance.
Recommended for rifles that have a metal hop up group with poor finishing (DBOYS e A&K).
Pay particular attention to the internal hole diameter of the pellet pusher, if the tube of your cylinder head is larger it is advisable to change it.
This product is designed and made entirely in Italy, by technicians who boast years of experience in repairing and modifying airsoft replicas.
Length: 21,2 mm
Internal hole diameter: 5,40 mm
100% MADE IN ITALY
| Weight | 0,02 kg |
|---|
Related products
-
Control units and Mosfets, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS Micro Mosfet (MICRO1)
Control units and Mosfets, FPS, Internal and external parts of rifles, Internal parts of riflesFPS Micro Mosfet (MICRO1)
Very small MOSFETs, conceived specifically for the reduced internal spaces of the replicas from Softair (MICRO1)
Measures in millimeters:
19.8 x 6.6 x 3.9100% MADE IN ITALY
SKU: MICRO1 -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 90 m/s (FPS-90+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 90 m/s (FPS-90+)
The FPS spring from 90 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-90+
