FPS Third version pellet pusher rod in technopolymer loaded with carbon fibre (ASV3CF)
Spingipallino auction in Tecnopolimero loaded for third version Gearbox (ASV3CF).
This product has been designed to be compatible with the majority of the Gear Box V3 today on the market.
100% MARUI COMPATIBLE
100% MADE IN ITALY
2 in stock
9,90€
2 in stock
Technopolymer pellet pusher rod loaded with carbon fiber for third version gearbox.
The adoption of carbon fiber gives this component greater lightness and mechanical strength as well as decreasing the friction coefficient.
This product has been designed to be compatible with the majority of V3 Gear Boxes on the market today.
The innovative design and accurate pre-production tests of this spare part have led us to obtain optimal timing in the opening phases, draft, chambering and ejection of the pellet and the choice and use of the most suitable filled technopolymer.
100% MARUI COMPATIBLE
100% MADE IN ITALY
| Weight | 0,025 kg |
|---|
Related products
-
AT COST, External parts of rifles, Internal and external parts of rifles, Slides and slide covers, Vector Optics
Medium 20mm metal support -4 Slot- Vector Optics
AT COST, External parts of rifles, Internal and external parts of rifles, Slides and slide covers, Vector OpticsMedium 20mm metal support -4 Slot- Vector Optics
metal support for weaver sled,useful for lifting red dots/optics from the slides of the replicas, height: 0,83 inches, ideale per magnifier 3x
SKU: VEC-10-030050 -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 100 m/s (FPS100+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 100 m/s (FPS100+)
The FPS spring from 100 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS100+
