FPS Pom Piston Head designed for fast bursts and to improve silence (TPAVP)
Piston head in reinforced technopolymero, Conceived for fast gusts and to increase the silence of the reply thanks to the very small pouring surface (TPAVP).
100% MARUI COMPATIBLE
100% MADE IN ITALY
1 in stock
9,90€
1 in stock
Piston head in reinforced technopolymero, Conceived for fast gusts and to increase the silence of the reply thanks to the very small pouring surface (TPAVP).
Its adoption lightens the weight of the striking mass composed of the piston and piston head with a notable decrease in mechanical stress and noise.
The particular shape of the beating part (conical sloping towards the centre) ensures that the ventilation holes are never closed by the cylinder head stop rubber, without leaving too much still air between the cylinder head and the piston head.
All this ensures perfect anti-vacuum without ever producing power drops.
The product is supplied with a loaded technopolymer washer.
Technical specifications:
Weight: 5.93 grams (with technopolymer washer)
100% MARUI COMPATIBLE
100% MADE IN ITALY
| Weight | 0,03 kg |
|---|
Related products
-
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 85 m/s (FPS-85)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 85 m/s (FPS-85)
The FPS spring from 85 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
In the calibration process, the thickness due to the bearings of the spring guide and the piston head was not taken into consideration, therefore, with the same initial conditions, an increase in performance of approximately 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-85
