SPINGIPALLINO IN POM FOR SERIES M4/M16 21.25MM GATE
PUSH BB INTO POM
21.25mm
FOR M4/M16 SERIES AEG REPLICAS
3 in stock
8,90€
3 in stock
| Weight | 0,02 kg |
|---|
Related products
-
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 100 m/s (FPS100+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 100 m/s (FPS100+)
The FPS spring from 100 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS100+ -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 95 m/s (FPS-95)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 95 m/s (FPS-95)
The FPS spring from 95 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-95 -
Control units and Mosfets, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS Micro Mosfet (MICRO1)
Control units and Mosfets, FPS, Internal and external parts of rifles, Internal parts of riflesFPS Micro Mosfet (MICRO1)
Very small MOSFETs, conceived specifically for the reduced internal spaces of the replicas from Softair (MICRO1)
Measures in millimeters:
19.8 x 6.6 x 3.9100% MADE IN ITALY
SKU: MICRO1
