* Shop by Brand
Showing 401–440 of 930 results
-
Wiring and electronic contacts, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS FEP coated high conduction signal cable with 128 pure copper capillaries coated in chrome (W128C)
Wiring and electronic contacts, FPS, Internal and external parts of rifles, Internal parts of riflesFPS FEP coated high conduction signal cable with 128 pure copper capillaries coated in chrome (W128C)
FPS is proud to present the first cable 100% Made in Italy designed specifically for the use in Softair replicas.
The FEP coating ensures perfect isolation and adequate resistance that combines the flexibility of small capillaries ensures the cable passage in each Gearbox channel.
The chrome coating, ensures a power passage clearly higher than the simple pure copper capillaries.100% MORE COMPATIBLE
100% MADE IN ITALYSKU: W128C -
Cylinders, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS TYPE “A” cylinder in CNC machined stainless steel (CLTA)
Cylinders, FPS, Internal and external parts of rifles, Internal parts of riflesFPS TYPE “A” cylinder in CNC machined stainless steel (CLTA)
Type "A" cylinder with internal air volume for rods that have length between 110 e 201 millimetres.
100% MADE IN ITALY
Compatibility examples:
– KURZ
– PDW
– STUBBY
– CxpSKU: CLTA -
Cylinders, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS TYPE “B” cylinder in CNC machined stainless steel (CLTB)
Cylinders, FPS, Internal and external parts of rifles, Internal parts of riflesFPS TYPE “B” cylinder in CNC machined stainless steel (CLTB)
Type "B" cylinder with internal air volume for rods that have length between 201 e 250 millimetres.
100% MADE IN ITALY
Compatibility examples:
– G3 sas
– MP5 / Sd5 / SD6 / J / A4 / A3
– UMP / UMG
– GR15 RAIDER
– GR4 G26
– G36C
– P90
– AK beta spetsnazSKU: CLTB -
Cylinders, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS TYPE “C” cylinder in CNC machined stainless steel (CLTC)
Cylinders, FPS, Internal and external parts of rifles, Internal parts of riflesFPS TYPE “C” cylinder in CNC machined stainless steel (CLTC)
Type "C" cylinder with internal air volume for rods that have length between 251 e 300 millimetres.
100% MADE IN ITALY
Compatibility examples:
– MC51
– M41
– Sig552
– SCAR-H CQC
– SCAR-L CQC
– MASADA MAGPUL RIS
– LR300
– M4cqbris
– Kac-PDW
– AKS74USKU: CLTC -
Cylinders, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS TYPE “D” cylinder in CNC machined stainless steel (CLTD)
Cylinders, FPS, Internal and external parts of rifles, Internal parts of riflesFPS TYPE “D” cylinder in CNC machined stainless steel (CLTD)
TYPE “D” cylinder with internal air volume for barrels with a length between 301 e 400 millimetres.
100% MADE IN ITALY
Compatibility examples:
– SIG551
– SCAR-L
– ACR MASADA
– A&K MASADA
– PTS MASADA AKM
– MASADA MAGPUL
– M4A1
– S-SYSTEM
– SR16
– LR300L
– GR15 RAIDER L
– G36K
– TAR21 SHORT
– COMMONSKU: CLTD -
Cylinders, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS TYPE “F” cylinder in CNC machined stainless steel (CLTF)
Cylinders, FPS, Internal and external parts of rifles, Internal parts of riflesFPS TYPE “F” cylinder in CNC machined stainless steel (CLTF)
TYPE “F” cylinder with internal air volume for barrels with a length between 451 e 550 millimetres.
100% MADE IN ITALY
Compatibility examples:
– G3SG1
– SIG550
– SCAR-MK17
– M16
– G36E
– SL8
– SL9
– AK74
– AK47
– GALIL
– AUG
– TAR21
– FAMASSKU: CLTF -
Control units and Mosfets, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS Micro Mosfet (MICRO1)
Control units and Mosfets, FPS, Internal and external parts of rifles, Internal parts of riflesFPS Micro Mosfet (MICRO1)
Very small MOSFETs, conceived specifically for the reduced internal spaces of the replicas from Softair (MICRO1)
Measures in millimeters:
19.8 x 6.6 x 3.9100% MADE IN ITALY
SKU: MICRO1 -
Control units and Mosfets, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS Micro Mosfet Active Brake (M2AB)
Control units and Mosfets, FPS, Internal and external parts of rifles, Internal parts of riflesFPS Micro Mosfet Active Brake (M2AB)
Small size Mosfet Active Brake, conceived specifically for the reduced internal spaces of the replicas from Softair (M2AB).
Measures in millimeters:
26.20 x 12 x 3.3100% MADE IN ITALY
SKU: M2AB -
Control units and Mosfets, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS Micro Mosfet Active Brake + Airsoft T-Plug (M2AB+)
Control units and Mosfets, FPS, Internal and external parts of rifles, Internal parts of riflesFPS Micro Mosfet Active Brake + Airsoft T-Plug (M2AB+)
Small size Mosfet Active Brake, conceived specifically for the reduced internal spaces of the replicas from Softair (M2AB+).
Measures in millimeters:
26.20 x 12 x 3.30100% MADE IN ITALY
SKU: M2AB+ -
FPS, Various springs, Internal and external parts of rifles, Internal parts of rifles
FPS Reinforced push rod spring for second and third version gearboxes (MARSV2/V3)
FPS, Various springs, Internal and external parts of rifles, Internal parts of riflesFPS Reinforced push rod spring for second and third version gearboxes (MARSV2/V3)
The FPS reinforced pellet pusher rod spring is designed and created in collaboration with leading companies in the sector.
The material used is burnished and pre-hardened carbon steel wire with the addition of silicon and chrome EN10270 / 2.
All FPS springs are 100% Made in Italy.SKU: MARS -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 100 m/s (FPS100+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 100 m/s (FPS100+)
The FPS spring from 100 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS100+ -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 105 m/s (FPS105+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 105 m/s (FPS105+)
The FPS spring from 105 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS105+ -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 110 m/s (FPS110+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 110 m/s (FPS110+)
The FPS spring from 110 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS110+ -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 120 m/s FPS (FPS120)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 120 m/s FPS (FPS120)
The FPS spring from 120 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS120+ -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 85 m/s (FPS-85)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 85 m/s (FPS-85)
The FPS spring from 85 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
In the calibration process, the thickness due to the bearings of the spring guide and the piston head was not taken into consideration, therefore, with the same initial conditions, an increase in performance of approximately 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-85 -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 90 m/s (FPS-90+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 90 m/s (FPS-90+)
The FPS spring from 90 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-90+ -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Spring from 95 m/s (FPS-95)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Spring from 95 m/s (FPS-95)
The FPS spring from 95 m/s was calibrated on rods from 363 mm e gearbox con cilindro type D (for rods 301 a 400 mm).
Of course, with shorter or longer barrels the performance will decrease or increase, so you will move on to the harder or softer calibration.
The thickness due to the spring guide and piston head bearings was not taken into consideration in the calibration process.
For this reason, given the same initial conditions, an increase in performance of approximately must be taken into account 2.5 m/s for each bearing.
The FPS spring is 100% Made in Italy and was created in collaboration with leading companies in the sector.SKU: FPS-95 -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Steel spring from 100 m/s for Marui SRE mechanics (SRE100+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Steel spring from 100 m/s for Marui SRE mechanics (SRE100+)
The FPS spring from 100 m/s has been calibrated in collaboration with Daniele Cimadoro di Terni Softair.
In the phase immediately following forming the spring is stabilized in the oven at a temperature of 400 degrees centigrade for thirty minutes in order to optimize its duration over time.
100% MADE IN ITALY
100% MORE COMPATIBLESKU: SRE100+ -
FPS, ASG springs, Internal and external parts of rifles, Internal parts of rifles
FPS Steel spring from 95 m/s for Marui SRE mechanics (SRE95+)
FPS, ASG springs, Internal and external parts of rifles, Internal parts of riflesFPS Steel spring from 95 m/s for Marui SRE mechanics (SRE95+)
The FPS spring from 95 m/s has been calibrated in collaboration with Daniele Cimadoro di Terni Softair.
In the phase immediately following forming the spring is stabilized in the oven at a temperature of 400 degrees centigrade for thirty minutes in order to optimize its duration over time.
100% MADE IN ITALY
100% MORE COMPATIBLESKU: SRE-95+ -
Delayer, FPS, Internal and external parts of rifles, Internal parts of rifles
FPS Three-piece set of loaded technopolymer delayers specifically designed for fast bursts (DL04)
Delayer, FPS, Internal and external parts of rifles, Internal parts of riflesFPS Three-piece set of loaded technopolymer delayers specifically designed for fast bursts (DL04)
Delayers in Tecnopolimero loaded expressly designed for fast gusts in collaboration with Nikk Sakk.extreme.aisoftcoman.
100% MARUI COMPATIBLE
100% MADE IN ITALYSKU: DL04 -
FPS, Internal and external parts of rifles, Internal parts of rifles, Nozzle
FPS Ergal pellet nozzle for Ares Tavor 21 with sealing hour (SP21E)
FPS, Internal and external parts of rifles, Internal parts of rifles, NozzleFPS Ergal pellet nozzle for Ares Tavor 21 with sealing hour (SP21E)
Nozzle in ERGAL for ARES TAVOR TAR series 21 with sealing hour (SP21E) obtained from solid and machined in CNC.
Designed to be compatible with all TAR replicas 21 ARES on the market today.
This product ensures excellent holding of the air compression phase, so the shots are more uniform and precise.
100% MADE IN ITALYSKU: SP21E -
FPS, Internal and external parts of rifles, Internal parts of rifles, Nozzle
FPS POM nozzle for M4/M16 series with sealing ring (SPM4P)
FPS, Internal and external parts of rifles, Internal parts of rifles, NozzleFPS POM nozzle for M4/M16 series with sealing ring (SPM4P)
Technopolymer nozzle for M4/M16 series with sealing ring (SPM4E), obtained from solid and machined in CNC.
Designed to be compatible with most M4/M16 replicas on the market today.
This product ensures excellent holding of the air compression phase, so the shots are more uniform and precise.
100% MADE IN ITALYSKU: SPM4P
